This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- For use with carbureted fuel pumps only.
- For use with gasoline fuel systems.
- High flow design supporting 400 to 700 HP.
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many MOPAR applications.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
The Mr.Gasket carb spacer kit is designed to fit the standard Holley/Carter bolt pattern. This precision die cast aluminum spacer kit comes complete with studs, washers, nuts and gaskets.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Dress up your engine the easy way with Edelbrock`s chrome air cleaner tops. Designed as direct replacements on GM V8 cars and trucks with TBI fuel injection, these tops are stamped from quality 18-gauge steel, and triple chrome plated for a high-quality finish for great style. A sealing ring is also included.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
The Performer carburetor maintenance kits consist of genuine Edelbrock parts that will help you to keep your carburetor in top notch condition. These kits include all of the parts and gaskets necessary to rebuild or modify your Edelbrock Performer carb.
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Quick disconnect ball joints for carburetor linkage.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
This adapter kit mounts Holley 2300 Series Carburetor to Small Rochester 2 Barrel Intake. Also can be inverted to mount Small Rochester carburetor to Manifold with Holley 2300 series bolt pattern.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
