This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- For use with carbureted fuel pumps only.
- For use with gasoline fuel systems.
- High flow design supporting 400 to 700 HP.
These direct replacement floats are made from a high quality phenolic resin and will fit a variety of Edelbrock and GM carbs.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
Do you have hood to air cleaner clearance problems? Mr. Gasket air cleaner will solve that problem. 14 in dia x 2-1/4 in tall. This chrome plated steel air cleaner fits all 5-1/8 in carb neck. This cleaner is designed to fit cars with minimal hood clearance. Filter element is flame retardant high CFM rating. Included are all PVC fittings and necessary...
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws, and three locking tabs.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
These Edelbrock carburetor idle mixture screws will fit directly into the base plate of your Edelbrock carburetor. They will allow adjustment to the idle circuit inside of the carburetor base plate. The screws are made of steel and include new springs for a simple installation.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
