Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Free flow rate: 110 GPH.
- Maximum pressure: 6 PSI.
- Inlet size: 3/8`` NPT female threads.
- Outlet size: 3/8`` NPT female threads.
- Gasket included.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Increase your power and performance with this 1`` carburetor spacer from Mr.Gasket. Designed to fit the standard Holley & Carter bolt pattern. This precision die cast aluminum spacer kit includes the studs, washers, nuts, gaskets and 3/8`` PCV tube.
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
When doing a rebuild on your Edelbrock carburetor, don`t forget to replace your accelerator pump with one of these top quality replacement pump assemblies. The right components will help to keep your carb working to its full potential.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
This chrome-plated steel throttle spring bracket mounts to carburetor stud or intake manifold. Features slotted design and fits most vehicles.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 CFM...
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many MOPAR applications.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
This chrome plated fuel pump mounting plate is ideal for mounting stock fuel pumps. The mounting plate is precision cut to cover the stock fuel pump opening and is complete with gasket. Fits Chevrolet Small Block 265-400.
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or...
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
