Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
Use this linkage rod along with the other linkage pieces Mr.Gasket has to offer to assemble your own custom carburetor setup. Measures 11 ½`` with ¼``-28 threads.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Designed to work with Edelbrock`s triangle and oval air cleaners, these reusable air filter elements are direct replacements. They`re made by K&N to fit Edelbrock`s air cleaners so you can be sure they are top quality. The filter`s cotton gauze filter material comes pre-oiled for excellent filtration and can be easily washed and reoiled for a lifetime...
These Edelbrock carburetor idle mixture screws will fit directly into the base plate of your Edelbrock carburetor. They will allow adjustment to the idle circuit inside of the carburetor base plate. The screws are made of steel and include new springs for a simple installation.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
This block-off plate is cut to cover stock fuel pump openings. Gasket included. Fits Chevy Big Block 396/427/454 & Chrysler 273/318/340/360/383/400/413/426W/426 Hemi/440. Also fits other engines with 1-3/4`` bolt spacing.
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws, and three locking tabs.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock Elite II Series air cleaners feature a design that is influenced by the original Elite Series released in 1985, but with a new modern take on this classic look. They are made from heavy-gauge, die-cast aluminum and are finished off with a show-quality, high-luster polished finish. The raised fins are accented by a contrast gloss black finish...
