MR. GASKET Carburetor Spacer Kit 1''
The Mr.Gasket carb spacer kit is designed to fit the standard Holley/Carter bolt pattern. This precision die cast aluminum spacer kit comes complete with studs, washers, nuts and gaskets.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
The Mr.Gasket carb spacer kit is designed to fit the standard Holley/Carter bolt pattern. This precision die cast aluminum spacer kit comes complete with studs, washers, nuts and gaskets.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock Elite II Series air cleaners feature a design that is influenced by the original Elite Series released in 1985, but with a new modern take on this classic look. They are made from heavy-gauge, die-cast aluminum and are finished off with a show-quality, high-luster polished finish. The raised fins are accented by a contrast gloss black finish...
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
Bring back the performance of your Q-Jet the easy way with one of these genuine Edelbrock performance Q-Jet rebuild kits. They`re designed for a trouble-free installation and include all of the parts and gaskets necessary to rebuild your carburetor right the first time.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
These Mr. Gasket air cleaner adapters end air cleaner fitment problems when you change carburetors. Molded from high-impact, heat-resistant material for durability.
This is a high quality carburetor stud that looks good and works well in all applications. This stud has a bullet tip which allows for easy carburetor installation and eliminates that problem of carb getting hung on the threads and not going down straight to the intake.
When doing a rebuild on your Edelbrock carburetor, don`t forget to replace your accelerator pump with one of these top quality replacement pump assemblies. The right components will help to keep your carb working to its full potential.
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many MOPAR applications.
These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock choke cable brackets are specifically designed to be used with Performer Series and/or Thunder Series AVS carburetors. Most of these assemblies are constructed of steel with a gold iridite finish to resist corrosion. Edelbrock is one of the industry legends for aftermarket automotive parts--you can't go wrong with their accessories to hold...