Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This carburetor adapater kit fits 4-bolt, 4-barrel carburetors to 4-bolt, 2-barrel intake manifolds or 4-bolt, 2-barrel carburetors to 4-bolt, 4-barrel intake manifolds and is 1`` thick with an open center, square bore to 2 barrel.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
What a great addition to your engine to finish off that new rebuild or to just dress up that old car. This air cleaner is perfect. The Chrome plating is high quality and will give you years of service, and it has a high flow filter that is replaceable.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
This Mr. Gasket throttle cable bracket is made from chrome plated steel.
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The...
Bring back the performance of your Q-Jet the easy way with one of these genuine Edelbrock performance Q-Jet rebuild kits. They`re designed for a trouble-free installation and include all of the parts and gaskets necessary to rebuild your carburetor right the first time.
When doing a rebuild on your Edelbrock carburetor, don`t forget to replace your accelerator pump with one of these top quality replacement pump assemblies. The right components will help to keep your carb working to its full potential.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
These direct replacement floats are made from a high quality phenolic resin and will fit a variety of Edelbrock and GM carbs.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Edelbrock throttle rod shoulder studs are designed to fit over the carburetor`s throttle lever. They will fit all Edelbrock Performer and Thunder AVS series carburetors. The Edelbrock throttle rod shoulder studs will also fit most applications using Chevrolet-style throttle linkage.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
