Reference: MRG-4963
Brand: Mr. Gasket
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Length: 24``.
- Width: 48``.
- Thickness: 0.63``.
- Installation: Pin-on.
Reference: MRG-4963
Brand: Mr. Gasket
Reference: MRG-1016
Brand: Mr. Gasket
Reference: MRG-4580
Brand: Mr. Gasket
Reference: EDL-4400
Brand: Edelbrock
Reference: THE-13575
Brand: Thermo Tec
Reference: THE-14620
Brand: Thermo Tec
Reference: THE-14720
Brand: Thermo Tec
Reference: THE-14110
Brand: Thermo Tec
Reference: THE-14600
Brand: Thermo Tec
Reference: THE-14001
Brand: Thermo Tec
Reference: THE-14125
Brand: Thermo Tec
Reference: THE-14700
Brand: Thermo Tec
Reference: THE-14120
Brand: Thermo Tec
Reference: THE-14710
Brand: Thermo Tec
Reference: THE-13590
Brand: Thermo Tec
Reference: THE-13700
Brand: Thermo Tec
Reference: THE-13775
Brand: Thermo Tec
Reference: THE-13200
Brand: Thermo Tec
Reference: THE-13585
Brand: Thermo Tec
Reference: THE-14130
Brand: Thermo Tec
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
check_circle
check_circle