Riferimento: MRG-1181
Marca: Mr. Gasket
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Length: 24``.
- Width: 48``.
- Thickness: 0.63``.
- Installation: Pin-on.
Riferimento: MRG-1181
Marca: Mr. Gasket
Riferimento: MRG-1957MRG
Marca: Mr. Gasket
Riferimento: THE-14110
Marca: Thermo Tec
Riferimento: MRG-4525
Marca: Mr. Gasket
Riferimento: MRG-1560
Marca: Mr. Gasket
Riferimento: CIP-10200
Marca: Cipa
Riferimento: THE-13775
Marca: Thermo Tec
Riferimento: THE-13585
Marca: Thermo Tec
Riferimento: THE-14125
Marca: Thermo Tec
Riferimento: THE-13500
Marca: Thermo Tec
Riferimento: THE-13575
Marca: Thermo Tec
Riferimento: THE-14620
Marca: Thermo Tec
Riferimento: THE-14001
Marca: Thermo Tec
Riferimento: THE-14710
Marca: Thermo Tec
Riferimento: THE-14720
Marca: Thermo Tec
Riferimento: THE-13200
Marca: Thermo Tec
Riferimento: THE-13590
Marca: Thermo Tec
Riferimento: THE-13700
Marca: Thermo Tec
Riferimento: THE-14110
Marca: Thermo Tec
Riferimento: THE-14120
Marca: Thermo Tec
Riferimento: THE-14600
Marca: Thermo Tec
Riferimento: THE-14700
Marca: Thermo Tec
Non è stato possibile inviare il tuo giudizio sulla recensione
Segnala commento
Segnalazione inviata
Non è stato possibile inviare la tua segnalazione
Scrivi la tua recensione
Recensione inviata
Non è stato possibile inviare la tua recensione
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
check_circle
check_circle