Artikel-Nr.: THE-14110
Marke: Thermo Tec
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- Length: 24``.
- Width: 48``.
- Thickness: 0.63``.
- Installation: Pin-on.
Artikel-Nr.: THE-14110
Marke: Thermo Tec
Artikel-Nr.: THE-13990
Marke: Thermo Tec
Artikel-Nr.: THE-14610
Marke: Thermo Tec
Artikel-Nr.: THE-13500
Marke: Thermo Tec
Artikel-Nr.: THE-14120
Marke: Thermo Tec
Artikel-Nr.: THE-14710
Marke: Thermo Tec
Artikel-Nr.: THE-14130
Marke: Thermo Tec
Artikel-Nr.: THE-13585
Marke: Thermo Tec
Artikel-Nr.: THE-14110
Marke: Thermo Tec
Artikel-Nr.: THE-14125
Marke: Thermo Tec
Artikel-Nr.: THE-13775
Marke: Thermo Tec
Artikel-Nr.: THE-14600
Marke: Thermo Tec
Artikel-Nr.: THE-13590
Marke: Thermo Tec
Artikel-Nr.: THE-14001
Marke: Thermo Tec
Artikel-Nr.: THE-13700
Marke: Thermo Tec
Artikel-Nr.: THE-13200
Marke: Thermo Tec
Artikel-Nr.: THE-14620
Marke: Thermo Tec
Ihre Bewertung der Rezension kann nicht gesendet werden
Kommentar melden
Meldung gesendet
Ihre Meldung kann nicht gesendet werden
Eigenen Kommentar verfassen
Bewertung gesendet
Ihre Bewertung kann nicht gesendet werden
Use Thermo Tec Cool-It insulating mats to battle excessive heat and noise that penetrate the driver compartment through the firewalls and floorboards. They are suitable for use in doors, under hoods, and above transmission housings. The Cool-It mats are composed of resin-bonded silica blanketing insulation sandwiched between a mylar facing on one side and a foil facing on the other. The highly-reflective mylar reflects heat away from surfaces, while the foil side is orientated away from the heat source to conduct any penetrating heat across its surface thus providing the ultimate in heat protection. They are easy to trim and can be applied with the push-in fasteners provided or any weather strip adhesive.
check_circle
check_circle