Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Free flow rate: 110 GPH.
- Maximum pressure: 6 PSI.
- Inlet size: 3/8`` NPT female threads.
- Outlet size: 3/8`` NPT female threads.
- Gasket included.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Mr. Gasket Flat Black Easy-Flow Air Cleaners customize your engine compartment for that stealth look. Designed to fit all single 2-, 3-, and 4-barrel carburetors with 5.125-inch carburetor necks, these competition air cleaners are ideal for either race or high-performance street use.
Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
When doing a rebuild on your Edelbrock carburetor, don`t forget to replace your accelerator pump with one of these top quality replacement pump assemblies. The right components will help to keep your carb working to its full potential.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws, and three locking tabs.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock knows carbs. That`s why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The...
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
