Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
Edelbrock fuel pressure regulator kits feature a unique design that allows them to be mounted directly to the fuel rail, taking out the hassle of trying to find a mounting place in the engine bay. Featuring a compact push-in style design with a swivel style mounting bracket, it can be clocked in various directions to fit your setup.
Clean fuel equals better performance and Edlbrock inline fuel filters will help. They offer a variety of filters that will keep your go-juice from being contaminated. Edelbrock inline fuel filters screen out the bad stuff so your engine gets the good stuff.
Edelbrock throttle solenoid and bracket kits are designed for square bore carburetors and raise your engine idle speed when the air conditioning is on. These kits include a 12 V solenoid and mounting bracket. The Edelbrock throttle solenoid bracket kits match perfectly with all Edelbrock Performance series and Carter AFB series carburetors.
Edelbrock Q-Jet bolt kits are suited for all Quadrajets, except for model EDL-1905. They include all of the bolts and hardware needed to mount your Performer Quadrajet to your intake manifold.
Edelbrock carburetor stud kits supply all of the correct studs, nuts and washers to mount your Edelbrock carburetor correctly. These carb stud kits are must-have accessories when installing or tuning your carburetor.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is ¼`` diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Kit includes all hardware needed for installation along with universal throttle bracket.
Tuning your own carburetor can mean replacing gaskets several times during testing. Edelbrock offers a good selection of metering block gaskets so that you`ll always have what you need. These black fiber gaskets are high-quality replacements for your carburetor.
Mr. Gasket Air Cleaner Spacer and Adapter Kit eliminates air cleaner fit problems and includes spacers and adapters of different heights that fit between the carburetor neck flange and the air filter assembly to allow the amount of clearance you need for your application.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment. Dirty filters will hurt performance and cause your engine to run poorly.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
These Edelbrock throttle rod shoulder studs are designed to fit over the carburetor`s throttle lever. They will fit all Edelbrock Performer and Thunder AVS series carburetors. The Edelbrock throttle rod shoulder studs will also fit most applications using Chevrolet-style throttle linkage.
