Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the primary venturi booster is a bottom-feed design for smoother acceleration and better driveability. Also included with every Edelbrock carburetor you will receive an owner`s manual. These manuals consist of two sections: Section 1, theory of operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor will be included.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- CFM: 500.
- Number of barrels: 4.
- Carburetor flange: Square bore.
- Choke: Manual.
- Secondary type: Mechanical.
- Fuel inlet: Single.
- Carburetor finish: Silver.
These direct replacement floats are made from a high quality phenolic resin and will fit a variety of Edelbrock and GM carbs.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Elite II Series air cleaners feature a design that is influenced by the original Elite Series released in 1985, but with a new modern take on this classic look. They are made from heavy-gauge, die-cast aluminum and are finished off with a show-quality, high-luster polished finish. The raised fins are accented by a contrast gloss black finish...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
These Edelbrock Performer series linkage kits have the parts you need to get your throttle linkage hooked up. They include seven links and six retaining clips.
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
Get quality fuel performance from your EFI system! These quality replacement high-flow fuel pumps from Edelbrock are just what you need to get your Pro-Flo EFI system back on track. They`re identical to the pumps supplied with the systems and are great for replacing malfunctioning or defective piece.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
Use to block off open engine vacuum fittings. Sixteen pcs. Of "Buna-N" rubber offer more durability, longer life than neoprene/vinyl, especially when exposed to high temps.
Edelbrock Victor series racing fuel pumps free-flow 130 gph, beating conventional racing pumps, which flow around 114 gph. These pumps are a necessity for drag racing, circle track, street machines or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. They are designed for use with...
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the primary venturi booster is a bottom-feed design for smoother acceleration and better driveability. Also included with every Edelbrock carburetor you will receive an owner`s manual. These manuals consist of two sections: Section 1, theory of operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor will be included.
