Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Use this linkage rod along with the other linkage pieces Mr.Gasket has to offer to assemble your own custom carburetor setup. Measures 11 ½`` with ¼``-28 threads.
Tune any Q-Jet with Edelbrock secondary metering rods. These secondary metering rods will work on any year Quadrajet. The dimension indicates the tip diameter, not the shaft diameter.
Fits Ford 4.7L & 5.0L.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Adjustable from 1-6 PSI, includes barbed fittings for use with ¼``, 5/16`` or 3/8`` fuel hose. For use with carburetor fuel systems only & engines not exceeding 400 HP. Select desired pressure settings via selector knob located on top of regulator. 2.25`` diameter chrome plated body.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Fits Holley carburetors, includes non-stick washer.
Universal in design and engineered to provide positive throttle return for increased safety. Inner and outer spring are Electro-Nickel bright plated to resist rust. Includes chrome-plated bracket.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is ¼`` diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Kit includes all hardware needed for installation along with universal throttle bracket.
This billet aluminum street fuel filter is made of billet aluminum for strength and shock resistance. Designed for carbureted engines making less than 300 HP, this bi-directional filter features a sintered bronze 40-micron element that can be cleaned or replaced.
Edelbrock knows carbs. That`s why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This inline clearview fuel filter has chrome ends and a glass body for clear and quick viewing of fuel flow and debris in the 100 micron white mesh replaceable filter element.
