Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Set of 2.
- Thread size: 5/16``-24.
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
This aluminum 1`` carburetor spacer fits square flange Edelbrock, Demon, Carter, Holley 4150 4160 model number carburetors. These precision die-cast aluminum carburetor spacers help increase power and performance expanding the plenum area of the manifold to help improve air/fuel atomization and distribution. Includes studs, washers, nuts and gaskets....
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
These highly polished, aluminum velocity stacks increase carburetor intake speed and capacity to maximize horsepower. Fits Holley carbs with 5-1/8``neck.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
The Edelbrock Cruise Control kit is used to retain the OEM cruise control hook-up when installing one of the Edelbrock Performer Series (or Thunder Series AVS carburetors). All mounting hardware to re-attach the cruise control to the Edelbrock carburetor is included in this kit.
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo and supercharged gasoline engines. They will allow you to adjust fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits...
These Grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Edelbrock electric chokes kits are designed to give you reliable starting in all weather conditions. The kits include all necessary parts to convert your carburetor into an electric choke operation.
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 CFM...
These carburetors have all of the performance features of Edelbrock`s performer carburetors, with an added twist: the Qwick Tune secondary air valve. This air valve can be easily adjusted to kick in the secondaries early or late, no extra springs are needed. These CNC-profiled, ball-burnished aluminum carbs feature black accented hardware and GM/AMC...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
