This inline clearview fuel filter with chrome ends and a glass body for clear and quick viewing of fuel flow and debris trapped in the 100 micron white mesh replaceable filter element supports up to 400 HP, includes ¼``, 5/16`` and 3/8`` hose barb fittings.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Not for fuel fuel injected applications.
- 10 PSI max. pressure.
- Chrome plated housing ends.
- 100 micron element for maximum fuel flow.
- Replaceable washable filter element.
- Fits 1/4``, 5/16`` and 3/8`` fuel hoses.
- Includes 6 hose barb fittings.
Mr. Gasket air cleaner nuts are made from billet aluminum with knurled sides for easy hand tightening.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
36`` long cable wrapped with a 24`` stainless steel braided sleeve. Can be cut to length to fit your specific application.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
Use to block off open engine vacuum fittings. Sixteen pcs. Of "Buna-N" rubber offer more durability, longer life than neoprene/vinyl, especially when exposed to high temps.
Mr. Gasket Air Cleaner Spacer and Adapter Kit eliminates air cleaner fit problems and includes spacers and adapters of different heights that fit between the carburetor neck flange and the air filter assembly to allow the amount of clearance you need for your application.
Quick disconnect ball joints for carburetor linkage.
This chrome-plated steel throttle spring bracket mounts to carburetor stud or intake manifold. Features slotted design and fits most vehicles.
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
Change those fuel filters regularly. You should change your fuel filter every time you change the oil. Our 3 pack replacement fuel filters elements will keep you from running out just when you need it.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo and supercharged gasoline engines. They will allow you to adjust fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits...
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
This inline clearview fuel filter with chrome ends and a glass body for clear and quick viewing of fuel flow and debris trapped in the 100 micron white mesh replaceable filter element supports up to 400 HP, includes ¼``, 5/16`` and 3/8`` hose barb fittings.
