This inline clearview fuel filter with chrome ends and a glass body for clear and quick viewing of fuel flow and debris trapped in the 100 micron white mesh replaceable filter element supports up to 400 HP, includes ¼``, 5/16`` and 3/8`` hose barb fittings.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- Not for fuel fuel injected applications.
- 10 PSI max. pressure.
- Chrome plated housing ends.
- 100 micron element for maximum fuel flow.
- Replaceable washable filter element.
- Fits 1/4``, 5/16`` and 3/8`` fuel hoses.
- Includes 6 hose barb fittings.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Clean fuel equals better performance and Edlbrock inline fuel filters will help. They offer a variety of filters that will keep your go-juice from being contaminated. Edelbrock inline fuel filters screen out the bad stuff so your engine gets the good stuff.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or...
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
These Edelbrock throttle rod shoulder studs are designed to fit over the carburetor`s throttle lever. They will fit all Edelbrock Performer and Thunder AVS series carburetors. The Edelbrock throttle rod shoulder studs will also fit most applications using Chevrolet-style throttle linkage.
Control your manual choke with Edelbrock choke cables. They are 72 in. long and use a 3/8 in. mounting hole on the dash, and can be used on any manual choke carburetor.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Install your throttle cables the right way with these throttle return kits from Edelbrock. Each kit includes the springs and bracket you need to ensure good looks and proper throttle actuation.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Bring back the performance of your Q-jet the easy way with these genuine Edelbrock replacement carburetor accessories. They`re designed to provide a care-free installation and help you to restore superior performance without breaking the bank.
Edelbrock throttle lever adapters are designed to facilitate an easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. The adapters work with cruise control and are available for many MOPAR applications.
This inline clearview fuel filter with chrome ends and a glass body for clear and quick viewing of fuel flow and debris trapped in the 100 micron white mesh replaceable filter element supports up to 400 HP, includes ¼``, 5/16`` and 3/8`` hose barb fittings.
