Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- This carburetor heat dissipator fits Holley 4 Barrel & Ram Manifolds and is ½`` thick.
- Each gasket & aluminum plate is 1/16`` thick.
- Carburetor opening is 3-5/8`` x 3-3/4``.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
These are high quality gaskets that are a good choice for replacement to seal those annoying leaks or when doing jet changes at the track.
These Grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
These Edelbrock accelerator pump nozzle kits will allow you to fine tune your carburetor. They include three tube style nozzles and the required gaskets. The kits include 1x 0.024``, 1x 0.033`` & 1x 0.043`` accelerator pump nozzle.
Quadrajet four hole design with 1.00`` height. Manufactured from advanced phenolic thermoset plastic and engineered to withstand extreme high intake manifold temperatures. These spacers are designed to insulate and reduce heat flow to the carburetor keeping it cooler to allow a denser fuel mixture to enter the engine and produce more horsepower. Comes...
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
These Edelbrock air horn gaskets will allow you to take off the top of your Edelbrock carburetor when changing jets or metering rods. They include five air horn gaskets so you can make multiple changes and use just one gasket kit.
This Mr. Gasket throttle cable bracket is made from chrome plated steel.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock metering jets will work on any Quadrajet and allow you to tune your Q-Jet for performance or economy. Choose the size that works best on your application.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
These Grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
