What a great addition to your engine to finish off that new rebuild or to just dress up that old car. This air cleaner is perfect. The Chrome plating is high quality and will give you years of service. It has a high flow filter that is replaceable and is only 2 in tall for those applications where hood clearance is a problem.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- 10`` x 2``.
- Chrome plated steel.
- High flow white filter.
- Wire screen on the inside.
- Steel mesh on the outside.
- Fits 5-1/8`` carburetor necks.
- Comes with stud and nut.
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo and supercharged gasoline engines. They will allow you to adjust fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits...
These Mr. Gasket air cleaner adapters end air cleaner fitment problems when you change carburetors. Molded from high-impact, heat-resistant material for durability.
These Edelbrock fuel pressure regulator brackets are designed to mount your regulator right by the carburetor. They are made from aluminum for durability.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock Q-Jet bolt kits are suited for all Quadrajets, except for model EDL-1905. They include all of the bolts and hardware needed to mount your Performer Quadrajet to your intake manifold.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock divorced choke kits are available to give you the same reliability as your stock divorced choke, but with brand new parts! These kits include all of the parts and gaskets necessary to rebuild the carburetor and will work on small block Chevrolet engines with an Edelbrock performer intake manifold.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
Use to block off open engine vacuum fittings. Sixteen pcs. Of "Buna-N" rubber offer more durability, longer life than neoprene/vinyl, especially when exposed to high temps.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock throttle solenoid and bracket kits are designed for square bore carburetors and raise your engine idle speed when the air conditioning is on. These kits include a 12 V solenoid and mounting bracket. The Edelbrock throttle solenoid bracket kits match perfectly with all Edelbrock Performance series and Carter AFB series carburetors.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
What a great addition to your engine to finish off that new rebuild or to just dress up that old car. This air cleaner is perfect. The Chrome plating is high quality and will give you years of service. It has a high flow filter that is replaceable and is only 2 in tall for those applications where hood clearance is a problem.
