Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete the job.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Puts an end to stripped out threads in cast aluminum manifolds.
- Holds the gasket in place and perfectly aligns the carburetor in position.
- Zinc plated and 1.5 inch long with 5/16 coarse threads on one end an 5/16 find threads on the other.
- Package of four with four matching nuts and washers.
This die-cast aluminum carburetor spacer kit fits Holley & Carter carburetors with standard bolt patterns with a 2`` open center.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Cable assembly is composed of a sturdy solid steel inner wire with a plated steel outer spring shroud. Cable is 72`` long and can be shortened with simple hand tools. Easily installed, it requires a 3/8`` diameter mounting hole.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
This is a high quality carburetor stud that looks good and works well in all applications. This stud has a bullet tip which allows for easy carburetor installation and eliminates that problem of carb getting hung on the threads and not going down straight to the intake.
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
Clean fuel equals better performance and Edlbrock inline fuel filters will help. They offer a variety of filters that will keep your go-juice from being contaminated. Edelbrock inline fuel filters screen out the bad stuff so your engine gets the good stuff.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Designed to work with Edelbrock`s triangle and oval air cleaners, these reusable air filter elements are direct replacements. They`re made by K&N to fit Edelbrock`s air cleaners so you can be sure they are top quality. The filter`s cotton gauze filter material comes pre-oiled for excellent filtration and can be easily washed and reoiled for a lifetime...
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws and three locking tabs.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Grade 5 hex head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Mr. Gasket MICRO ELECTRIC FUEL PUMPS are compatible with gasoline only. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer pump and makes a great stand-alone or booster pump.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete the job.
