EDELBROCK Performer Carburetor 500 cfm Electric Choke
  • EDELBROCK Performer Carburetor 500 cfm Electric Choke
  • EDELBROCK Performer Carburetor 500 cfm Electric Choke
  • EDELBROCK Performer Carburetor 500 cfm Electric Choke
  • EDELBROCK Performer Carburetor 500 cfm Electric Choke
  • EDELBROCK Performer Carburetor 500 cfm Electric Choke

EDELBROCK Performer Carburetor 500 cfm Electric Choke

EDL-1403
Edelbrock

Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the primary venturi booster is a bottom-feed design for smoother acceleration and better driveability. Also included with every Edelbrock carburetor you will receive an owner`s manual. These manuals consist of two sections: Section 1, theory of operation and tuning procedures which will help you be prepared to develop your own individualized calibration. Section 2, tuning procedures will take you through a step-by-step procedure that will enable you to achieve a desirable calibration. For added ease of tuning, a Calibration reference chart for your model of carburetor will be included.

CHF877.77
Tax included
Quantity

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Description

- CFM: 500.

- Number of barrels: 4.

- Carburetor flange: Square bore.

- Choke: Electric.

- Secondary type: Mechanical.

- Fuel inlet: Single.

- Carburetor finish: Silver.

Product Details
EDL-1403
GPSR

Brand: Edelbrock

16 other products in the same category:
EDELBROCK Air Filter Element 14x3''

Reference: EDL-1217

Brand: Edelbrock

EDELBROCK Air Filter Element 14x3''

(0)
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
CHF52.54
More EDELBROCK Air Filter Element 14x3''
MR. GASKET Carburetor Linkage Bushing

Reference: MRG-6026

Brand: Mr. Gasket

MR. GASKET Carburetor Linkage Bushing

(0)
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
CHF35.24
More MR. GASKET Carburetor Linkage Bushing
EDELBROCK Throttle Cable Plate Kit Ford 351M/400

Reference: EDL-1493

Brand: Edelbrock

EDELBROCK Throttle Cable Plate Kit Ford 351M/400

(0)
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
CHF24.11
More EDELBROCK Throttle Cable Plate Kit Ford 351M/400
EDELBROCK Metering Jets .119''

Reference: EDL-1435

Brand: Edelbrock

EDELBROCK Metering Jets .119''

(0)
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
CHF12.54
More EDELBROCK Metering Jets .119''
EDELBROCK Classic Series Air Cleaner Large Oval Polished

Reference: EDL-4119

Brand: Edelbrock

EDELBROCK Classic Series Air Cleaner Large Oval Polished

(0)
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
CHF385.70
More EDELBROCK Classic Series Air Cleaner Large Oval Polished
MR. GASKET Carburetor Studs 1-1/2''

Reference: MRG-60

Brand: Mr. Gasket

MR. GASKET Carburetor Studs 1-1/2''

(0)
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
CHF17.84
More MR. GASKET Carburetor Studs 1-1/2''
EDELBROCK Dual-Quad Progressive Linkage Kit

Reference: EDL-7094

Brand: Edelbrock

EDELBROCK Dual-Quad Progressive Linkage Kit

(0)
Choose from a variety of throttle linkage kits from Edelbrock for your dual or tripple carburetor equipped car. From smooth, progressive throttle activation to adjustable forward mount styles that let you dial in the amount of throttle you want, we have a linkage kit that`s right for you.
CHF110.48
More EDELBROCK Dual-Quad Progressive Linkage Kit
EDELBROCK Classic Series Air Cleaner Oval Polished

Reference: EDL-4115

Brand: Edelbrock

EDELBROCK Classic Series Air Cleaner Oval Polished

(0)
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
CHF421.16
More EDELBROCK Classic Series Air Cleaner Oval Polished
EDELBROCK Air Cleaner Spacer 3/4''

Reference: EDL-8092

Brand: Edelbrock

EDELBROCK Air Cleaner Spacer 3/4''

(0)
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
CHF15.57
More EDELBROCK Air Cleaner Spacer 3/4''
EDELBROCK Vacuum Caps

Reference: EDL-4804

Brand: Edelbrock

EDELBROCK Vacuum Caps

(0)
These Edelbrock Vacuum Caps provide a way to seal vacuum line connections on your intake manifold, carburetor or wherever you need.
CHF26.38
More EDELBROCK Vacuum Caps
Comments (0)
Grade
No customer reviews for the moment.

Follow us on Facebook