The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Zinc plated steel stud.
- Adapter & wing nut.
- Will fit most domestic carburetors.
- Allows use of a 5`` tall air filter element.
- Stud can be cut to fit shorter air filters.
Edelbrock Pro-Flo Round Air Filter Elements are washable and reusable and feature a unique Pro-Charge strip that will let you know when it`s time to clean your filter. Each filter comes pre-oiled for easy installation and is available in multiple colors to match your ride.
These are high quality gaskets that are a good choice for replacement to seal those annoying leaks or when doing jet changes at the track.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Bring back the performance of your Q-Jet the easy way with one of these genuine Edelbrock performance Q-Jet rebuild kits. They`re designed for a trouble-free installation and include all of the parts and gaskets necessary to rebuild your carburetor right the first time.
Edelbrock 94 round chrome air cleaners are designed to properly clear and fit your Edelbrock 94 Series carburetor for a complete hot rod look. They feature a high-quality paper element and a brilliant triple chrome top that is reminiscent of the early hot rod era. Each air cleaner includes a top, base, filter, band clamp, and wing nut. Edelbrock 94 air...
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor. This unit also acts as a carburetor mounting gasket.
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Tune any Q-Jet with Edelbrock secondary metering rods. These secondary metering rods will work on any year Quadrajet. The dimension indicates the tip diameter, not the shaft diameter.
Make sure your carburetor has the fuel it needs with these Edelbrock float kits. The kits include floats, pins, and a float setting gauge, making it easy to be sure your carb is never short of the fuel it needs.
Diese widerstandsfähigen Outdoor-Teppiche von Faulkner schaffen eine gemütliche Atmosphäre auf ihrem Balkon, Veranda oder vor ihrem Wohnmobil oder Wohnwagen. Sie sind leicht und durch beidseitige Bedruckung beidseitig einsetzbar. Zudem verfügen sie über Ösen an den Ecken, mit welchen die Teppiche für optimalen Halt befestigt werden können.
Quit using old Tupperware bowls to hold your small parts and fasteners. Use Performance Tool`s magnetic nut and bolt trays instead to keep items secured within. These magnetic trays feature stainless steel construction with a durable rubber coating to help prevent surface scratches and scuffing. They easily attach to most steel surfaces horizontally,...
There`s nothing worse than watching a nut or bolt fall down to the tightest crevice of your engine compartment, right where you can`t reach it. Now, with Performance Tool retrieval tools, you can reach them with ease. They`re available in magnetic or prong-type retrieval styles, and some are even lighted, so we`re sure to have one to suit your needs.
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
