The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Zinc plated steel stud.
- Adapter & wing nut.
- Will fit most domestic carburetors.
- Allows use of a 5`` tall air filter element.
- Stud can be cut to fit shorter air filters.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment. Dirty filters will hurt performance and cause your engine to run poorly.
This carburetor adapater kit fits 4-bolt, 4-barrel carburetors to 4-bolt, 2-barrel intake manifolds or 4-bolt, 2-barrel carburetors to 4-bolt, 4-barrel intake manifolds and is 1`` thick with an open center, square bore to 2 barrel.
These Edelbrock air horn gaskets will allow you to take off the top of your Edelbrock carburetor when changing jets or metering rods. They include five air horn gaskets so you can make multiple changes and use just one gasket kit.
Edelbrock carburetor stud kits supply all of the correct studs, nuts and washers to mount your Edelbrock carburetor correctly. These carb stud kits are must-have accessories when installing or tuning your carburetor.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock divorced choke kits are available to give you the same reliability as your stock divorced choke, but with brand new parts! These kits include all of the parts and gaskets necessary to rebuild the carburetor and will work on small block Chevrolet engines with an Edelbrock performer intake manifold.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor. This unit also acts as a carburetor mounting gasket.
These Mr. Gasket air cleaner adapters end air cleaner fitment problems when you change carburetors. Molded from high-impact, heat-resistant material for durability.
Control your manual choke with Edelbrock choke cables. They are 72 in. long and use a 3/8 in. mounting hole on the dash, and can be used on any manual choke carburetor.
This die-cast aluminum carburetor spacer kit fits Holley & Carter carburetors with standard bolt patterns with a 2`` open center.
Mr.Gasket's polished aluminum fuel filter will add the finishing touch to your engine compartment. Features a washable sintered bronze filter element for positive filtration, while keeping restriction to a minimum. The unit has 3/8`` O.D. inlet/outlet and includes two clamps for easy installation.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
There`s nothing worse than watching a nut or bolt fall down to the tightest crevice of your engine compartment, right where you can`t reach it. Now, with Performance Tool retrieval tools, you can reach them with ease. They`re available in magnetic or prong-type retrieval styles, and some are even lighted, so we`re sure to have one to suit your needs.
Diese widerstandsfähigen Outdoor-Teppiche von Faulkner schaffen eine gemütliche Atmosphäre auf ihrem Balkon, Veranda oder vor ihrem Wohnmobil oder Wohnwagen. Sie sind leicht und durch beidseitige Bedruckung beidseitig einsetzbar. Zudem verfügen sie über Ösen an den Ecken, mit welchen die Teppiche für optimalen Halt befestigt werden können.
Quit using old Tupperware bowls to hold your small parts and fasteners. Use Performance Tool`s magnetic nut and bolt trays instead to keep items secured within. These magnetic trays feature stainless steel construction with a durable rubber coating to help prevent surface scratches and scuffing. They easily attach to most steel surfaces horizontally,...
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
