Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- Set of 2.
- Thread size: 5/16``-24.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Mr. Gasket Flat Black Easy-Flow Air Cleaners customize your engine compartment for that stealth look. Designed to fit all single 2-, 3-, and 4-barrel carburetors with 5.125-inch carburetor necks, these competition air cleaners are ideal for either race or high-performance street use.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
These Edelbrock carburetor idle mixture screws will fit directly into the base plate of your Edelbrock carburetor. They will allow adjustment to the idle circuit inside of the carburetor base plate. The screws are made of steel and include new springs for a simple installation.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Bring back the performance of your Q-Jet the easy way with one of these genuine Edelbrock performance Q-Jet rebuild kits. They`re designed for a trouble-free installation and include all of the parts and gaskets necessary to rebuild your carburetor right the first time.
These Edelbrock fuel pressure regulator brackets are designed to mount your regulator right by the carburetor. They are made from aluminum for durability.
Control your manual choke with Edelbrock choke cables. They are 72 in. long and use a 3/8 in. mounting hole on the dash, and can be used on any manual choke carburetor.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Get smooth trouble-free throttle operation with a new bushing. Fits 1/4" diameter rod.
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Clogged up dirty air filters will hurt performance and cause your engine to run poorly.
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock Performer series and Thunder series AVS carburetors only. Do not use them with any other brands.
