By wrapping your headers and exhaust pipe with Thermo Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2000 degrees Fahrenheit and installs easily with standard hose clamps or the optional stainless steel snap straps.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Width: 1``.
- Length: 50 ft.
- Color: Natural.
These are high quality steel bolts that have a black oxide coating to resist rust and work well where space is minimal (like in most header applications), the smaller allen head allows you to get that smaller allen wrench on the bolt to tighten it.
Too much heat can lead to detrimental results for engines, fuel systems and vehicle occupants. Thermo Tec stainless steel clamp-on heat shields block over 95 percent of radiant exhaust heat. These strong, flexible shields simply wrap around your exhaust pipes and clamp in place to contain the hot temps. In fact, they've been shown to reduce heat under the...
Thermo Tec silicone-coated fiberglass fire sleeves are designed to protect wires, cables and hoses from high-temperature exposure, liquid spills, and occasional exposure to flames. The high-quality sleeving is made from braided fiberglass and coated with a compound silicone rubber. These heat sleeves are capable of continuous protection to 500 degrees...
Using Thermo Tec Thermo Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today`s high-performance applications.
These flexible clamp-on pipe heat shields from Thermo Tec block over 98 percent of the damaging radiant heat of the exhaust. The high-tech composite construction of the heat shields provides the ultimate in protection.
When installing headers, your factory exhaust bolts will not work to attach the headers back to the motor. Those Mr. Gasket header bolts are designed for quick and easy installation. The bolts look good on all applications and have a black oxide coating that resists rust.
Thermo Tec Generation II copper header wraps are designed to improve heat resistance by up to 30 percent over current technology, by utilizing a new proprietary coating developed by Thermo Tec. They create more horsepower and reduce underhood temperatures, increase exhaust scavenging, withstand continuous heat up to 2000 degrees Fahrenheit, and contain no...
Thermo Tec Thermo-Flex aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides for abrasion resistance, thermal insulation, and the physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which creates sleeves that are...
Thermo Tec spark plug wire heat shield sleeves feature aluminized outer surfaces that reflect 90 percent of radiant heat, with formulated inside silica based fabrics that prevent conductive heat from penetrating. The ultimate protection for spark plug wires and boots. These sleeves block conductive heat and reflect 90 percent of radiant heat up to 2000...
These bolts completely take the hassle out of header installation. They keep you from burning your hands getting the bolts installed. The gold-colored thread-lock patch prevents bolts from backing out or vibrating loose. 24 equally spaced serrations lock onto the header or exhaust manifold flange.
Designed for quick, easy installation of headers and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is ideal for tight spaces. These bolts are grade 5 with a 7/16`` hex head and a protective black finish.
Thermo Tec starter heat shields allow the user to insulate the starter and solenoid. The unique construction of the aluminized material provides protection by reflecting up to 90 percent of radiant heat. Mounting straps are included.
Breite: 50.8 mm Länge: 15.24 m
Thermo Tec snap straps are multi-purpose, high-temperature, stainless steel fasteners used to secure exhaust insulating wrap and more, with no tools needed. The straps have a narrow profile to fit tight spots, and can be cut to the exact length needed. Snap straps secure with easy-to-use, slide-through fasteners.
These flexible clamp-on pipe heat shields from Thermo Tec block over 98 percent of the damaging radiant heat of the exhaust. The high-tech composite construction of the heat shields provides the ultimate in protection.
Thermo Tec silicone-coated fiberglass fire sleeves are designed to protect wires, cables and hoses from high-temperature exposure, liquid spills, and occasional exposure to flames. The high-quality sleeving is made from braided fiberglass and coated with a compound silicone rubber. These heat sleeves are capable of continuous protection to 500 degrees...
By wrapping your headers and exhaust pipe with Thermo Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust wrap can withstand continuous heat up to 2000 degrees Fahrenheit and installs easily with standard hose clamps or the optional stainless steel snap straps.
