Mr. Gasket Flat Black Easy-Flow Air Cleaners customize your engine compartment for that stealth look. Designed to fit all single 2-, 3-, and 4-barrel carburetors with 5.125-inch carburetor necks, these competition air cleaners are ideal for either race or high-performance street use.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- 14`` x 3`` filter element.
- Black satin steel base & top.
- Includes mounting stud & wing nut.
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Mr. Gasket air cleaner nuts are made from billet aluminum with knurled sides for easy hand tightening.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
The Mr.Gasket carburetor heat shield will help eliminate fuel boiling and vapor lock caused by heat conducted from the manifold to the carburetor.
This is a high quality carburetor stud that looks good and works well in all applications. This stud has a bullet tip which allows for easy carburetor installation and eliminates that problem of carb getting hung on the threads and not going down straight to the intake.
Edelbrock fuel pump block-off plates are designed to block-off the stock fuel pump mounting location when a mechanical fuel pump is replaced with an electrical system.
Install your throttle cables the right way with these throttle return kits from Edelbrock. Each kit includes the springs and bracket you need to ensure good looks and proper throttle actuation.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Universal in design and engineered to provide positive throttle return for increased safety. Inner and outer spring are Electro-Nickel bright plated to resist rust. Includes chrome-plated bracket.
Mr. Gasket Flat Black Easy-Flow Air Cleaners customize your engine compartment for that stealth look. Designed to fit all single 2-, 3-, and 4-barrel carburetors with 5.125-inch carburetor necks, these competition air cleaners are ideal for either race or high-performance street use.
