Home
EDELBROCK Fuel Pressure Regulator Kit
  • EDELBROCK Fuel Pressure Regulator Kit

EDELBROCK Fuel Pressure Regulator Kit

EDL-8192
Edelbrock

Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo and supercharged gasoline engines. They will allow you to adjust fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits include fittings, a mounting plate, fuel line and single or dual regulator.

283,01 CHF
Tasse incluse
Quantità

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Descrizione

- Pressure range: 4.5-9 PSI.

- Inlet size: 3/8`` NPT.

- Outlet size: 2x 3/8`` NPT.

- Mounting bracket & fittings included.

Dettagli del prodotto
EDL-8192
GPSR

Marca: Edelbrock

16 altri prodotti della stessa categoria:
EDELBROCK Metering Jets .077''

Riferimento: EDL-1420

Marca: Edelbrock

EDELBROCK Metering Jets .077''

(0)
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
12,54 CHF
Più EDELBROCK Metering Jets .077''
MR. GASKET Carburetor Studs 1-3/8''

Riferimento: MRG-59

Marca: Mr. Gasket

MR. GASKET Carburetor Studs 1-3/8''

(0)
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1-3/8-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to...
19,13 CHF
Più MR. GASKET Carburetor Studs 1-3/8''
EDELBROCK Metering Jets .107''

Riferimento: EDL-1431

Marca: Edelbrock

EDELBROCK Metering Jets .107''

(0)
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
12,54 CHF
Più EDELBROCK Metering Jets .107''
EDELBROCK 4-Barrel Carburetor Spacer

Riferimento: EDL-8714

Marca: Edelbrock

EDELBROCK 4-Barrel Carburetor Spacer

(0)
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
111,88 CHF
Più EDELBROCK 4-Barrel Carburetor Spacer
MR. GASKET Intake Manifold Bolt Kit 3/8-16x1''

Riferimento: MRG-955G

Marca: Mr. Gasket

MR. GASKET Intake Manifold Bolt Kit 3/8-16x1''

(0)
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
32,00 CHF
Più MR. GASKET Intake Manifold Bolt Kit 3/8-16x1''
EDELBROCK Carburetor Calibration Kit

Riferimento: EDL-1842

Marca: Edelbrock

EDELBROCK Carburetor Calibration Kit

(0)
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
108,32 CHF
Più EDELBROCK Carburetor Calibration Kit
EDELBROCK Gasket Set

Riferimento: EDL-1472

Marca: Edelbrock

EDELBROCK Gasket Set

(0)
Edelbrock carburetor gasket kits are made to signify the high standards and performance that Edelbrock is known for. Edelbrock gasket kits seal intakes, heads, carb-to-manifolds and other components. You can trust the quality of Edelbrock carburetor gasket kits to protect your engine.
21,30 CHF
Più EDELBROCK Gasket Set
Commenti (0)
Valutazione
Ancora nessuna recensione da parte degli utenti.

Seguici su Facebook

Facebook