Produkteübersicht

MR. GASKET Adjustable Fuel Pressure Regulator

MRG-9710
Adjustable from 1-6 PSI, includes barbed fittings for use with ¼``, 5/16`` or 3/8`` fuel hose. For use with carburetor fuel systems only & engines not exceeding 400 HP. Select desired pressure settings via selector knob located on top of regulator. 2.25`` diameter chrome plated body.
109,40 CHF
Bruttopreis
Menge

 

Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨

 

Lieferungen gemäss den allgemeinen Geschäftsbedingungen

 

Umtausch gemäss den allgemeinen Geschäftsbedingung

Artikeldetails

MRG-9710

Besondere Bestellnummern

16 andere Artikel in der gleichen Kategorie:

MR. GASKET Carburetor Adapter Kit

This adapter kit mounts Holley 2300 Series Carburetor to Small Rochester 2 Barrel Intake. Also can be inverted to mount Small Rochester carburetor to Manifold with Holley 2300 series bolt pattern.

Preis 63,56 CHF
Mehr
Auf Lager

EDELBROCK Metering Jets .100''

Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...

Preis 11,35 CHF
Mehr
Auf Lager

MR. GASKET Intake Manifold Bolt Kit 3/8-16x1''

You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.

Preis 32,00 CHF
Mehr
Auf Lager

EDELBROCK Throttle Cable Plate Kit Ford 289-302

Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...

Preis 34,16 CHF
Mehr
Auf Lager

MR. GASKET Carburetor Heat Dissipator

Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.

Preis 107,88 CHF
Mehr
Auf Lager

MR. GASKET Chevy Small Block Intake Manifold Bolt Kit

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They're ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Preis 71,35 CHF
Mehr
Auf Lager

EDELBROCK Accelerator Pump Assembly

When doing a rebuild on your Edelbrock carburetor, don`t forget to replace your accelerator pump with one of these top quality replacement pump assemblies. The right components will help to keep your carb working to its full potential.

Preis 21,40 CHF
Mehr
Auf Lager

MR. GASKET Vacuum Cap Assortment

Use to block off open engine vacuum fittings. Sixteen pcs. Of "Buna-N" rubber offer more durability, longer life than neoprene/vinyl, especially when exposed to high temps.

Preis 24,43 CHF
Mehr
Auf Lager

EDELBROCK Throttle Cable Plate Kit Ford 351W

Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...

Preis 24,43 CHF
Mehr
Auf Lager

EDELBROCK Ball End Stud Holley Carbs

These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.

Preis 11,78 CHF
Mehr
Auf Lager