This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- 9`` diameter.
- 2`` height.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
Adapts your PCV system to Mr. Gasket air cleaner kits. 90 degree angle style.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Mr. Gasket air cleaner adapters end air cleaner fitment problems when you change carburetors. Molded from high-impact, heat-resistant material for durability.
These highly polished, aluminum velocity stacks increase carburetor intake speed and capacity to maximize horsepower. Fits Holley carbs with 5-1/8``neck.
Edelbrock single and dual regulator kits are designed for use with Holley square bore or 4500 Dominator series dual-feed carburetors on alcohol, turbo and supercharged gasoline engines. They will allow you to adjust fuel pressure from 4-1/2 to 9 PSI and are recommended for use with either Edelbrock racing fuel pumps or any high-output fuel pumps. The kits...
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
These Edelbrock accelerator pump nozzle kits will allow you to fine tune your carburetor. They include three tube style nozzles and the required gaskets. The kits include 1x 0.024``, 1x 0.033`` & 1x 0.043`` accelerator pump nozzle.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
What a great addition to your engine to finish off that new rebuild or to just dress up that old car. This air cleaner is perfect. The Chrome plating is high quality and will give you years of service, and it has a high flow filter that is replaceable and easy to change.
Mr. Gasket air cleaner nuts are made from billet aluminum with knurled sides for easy hand tightening.
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
Edelbrock fuel pump block-off plates are designed to block-off the stock fuel pump mounting location when a mechanical fuel pump is replaced with an electrical system.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment and also keeps that air coming. Dirty filters will hurt performance and cause your engine to run a rich mixture.
