Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
This carburetor adapter kit adapts square flange carburetors to Quadra-jet 4-barrel intake manifolds and is ¾`` thick with an open center, square bore to spread bore. This kit installs quickly and easily. Gaskets, studs, nuts and washers are included. Adapters are made of die cast aluminum.
Edelbrock knows carbs. That`s why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
Edelbrock Racing series air cleaners are made from heavy-gauge die-cast aluminum and feature a sleek flat black powder coated finish, raised diamond racing stripes, and an Edelbrock Racing logo. The modern high-tech look will give any engine an aggressive look to match its performance. These air cleaners feature Pro-Flo air filters with the exclusive...
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Edelbrock air horn gaskets will allow you to take off the top of your Edelbrock carburetor when changing jets or metering rods. They include five air horn gaskets so you can make multiple changes and use just one gasket kit.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Mr. Gasket air cleaner nuts are made from billet aluminum with knurled sides for easy hand tightening.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
Mr. Gasket`s MICRO ELECTRIC Diesel FUEL PUMP, 12-volt electric transfer pump is safe for diesel fuel use. Simple 2 wire design, gravity fed type pump, includes 100 micron in line filter. 4-7 PSI, 35GPH, small universal design allows easy set and installation anywhere.
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
