Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- Free flow rate: 110 GPH.
- Maximum pressure: 6 PSI.
- Inlet size: 3/8`` NPT female threads.
- Outlet size: 3/8`` NPT female threads.
- Gasket included.
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
These Edelbrock fuel pressure regulator brackets are designed to mount your regulator right by the carburetor. They are made from aluminum for durability.
These are high quality gaskets that are a good choice for replacement to seal those annoying leaks or when doing jet changes at the track.
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
These Edelbrock carburetor idle mixture screws will fit directly into the base plate of your Edelbrock carburetor. They will allow adjustment to the idle circuit inside of the carburetor base plate. The screws are made of steel and include new springs for a simple installation.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Chrome plated steel. Includes heavy and light spring sets. Fits Holley carburetors.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock Victor series racing fuel pumps free-flow 130 gph, beating conventional racing pumps, which flow around 114 gph. These pumps are a necessity for drag racing, circle track, street machines or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. They are designed for use with...
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The...
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The high-volume, 3/8 in. NPT inlet and outlets surpass the capacity of many other pumps. Edelbrock Performer RPM street fuel pumps produce 6 psi and do not require a regulator. Best of all, the clockable lower housing can be rotated for the best inlet and outlet alignment. They are designed for use with gasoline only.
