Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
Edelbrock metering jets will work on any Quadrajet and allow you to tune your Q-Jet for performance or economy. Choose the size that works best on your application.
These Edelbrock accelerator pump nozzle kits will allow you to fine tune your carburetor. They include three tube style nozzles and the required gaskets. The kits include 1x 0.024``, 1x 0.033`` & 1x 0.043`` accelerator pump nozzle.
Change those fuel filters regularly. You should change your fuel filter every time you change the oil. Our 3 pack replacement fuel filters elements will keep you from running out just when you need it.
The 5-3/4" long stud fits air Filters up to 5" tall. The 1/4"-20 stud fits most carburetors. Dominator carburetors use the adapter since they have a 5/16"-18 tapped hole in the carburetor.
This aluminum 1`` carburetor spacer fits square flange Edelbrock, Demon, Carter, Holley 4150 4160 model number carburetors. These precision die-cast aluminum carburetor spacers help increase power and performance expanding the plenum area of the manifold to help improve air/fuel atomization and distribution. Includes studs, washers, nuts and gaskets....
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1-3/8-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to...
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
Edelbrock Classic Series air cleaners were created to perfectly match Edelbrock`s popular classic aluminum finned valve covers. Three models for single or dual-quads give you plenty of options for that "just right" look on any nostalgic rod or muscle car. Additionally, the small oval air cleaners provide adequate hood clearance in demanding applications,...
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws, and three locking tabs.
