THERMO TEC Express Sleeves
  • THERMO TEC Express Sleeves

THERMO TEC Express Sleeves

THE-14030
Thermo Tec

Thermo-Tec`s new Express Sleeves use a combination of high-temperature insulation material and a highly reflective Mylar foil with a Velcro closure. The sleeves are designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap it around the wire, and re-close the sleeves. Express Sleeves reflect over 90 percent of radiant heat and are fireproof and fire-resistant.

56,21 CHF
Tasse incluse
Quantità

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Descrizione

- Length: 36``.

- Diameter: 1``.

- Color: Silver.

Dettagli del prodotto
THE-14030
GPSR

Marca: Thermo Tec

16 altri prodotti della stessa categoria:
THERMO TEC Clamp-On Heat Shield

Riferimento: THE-11676

Marca: Thermo Tec

THERMO TEC Clamp-On Heat Shield

(0)
Too much heat can lead to detrimental results for engines, fuel systems and vehicle occupants. Thermo Tec stainless steel clamp-on heat shields block over 95 percent of radiant exhaust heat. These strong, flexible shields simply wrap around your exhaust pipes and clamp in place to contain the hot temps. In fact, they've been shown to reduce heat under the...
136,85 CHF
Più THERMO TEC Clamp-On Heat Shield
THERMO TEC Express Sleeves

Riferimento: THE-14031

Marca: Thermo Tec

THERMO TEC Express Sleeves

(0)
Thermo-Tec`s new Express Sleeves use a combination of high-temperature insulation material and a highly reflective Mylar foil with a Velcro closure. The sleeves are designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap it around the...
172,10 CHF
Più THERMO TEC Express Sleeves
THERMO TEC Aluminum Heat Shield Sleeve

Riferimento: THE-17063

Marca: Thermo Tec

THERMO TEC Aluminum Heat Shield Sleeve

(0)
Thermo Tec Thermo-Flex aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides for abrasion resistance, thermal insulation, and the physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which creates sleeves that are...
30,81 CHF
Più THERMO TEC Aluminum Heat Shield Sleeve
MR. GASKET Headlock Locking Header Bolts

Riferimento: MRG-2231G

Marca: Mr. Gasket

MR. GASKET Headlock Locking Header Bolts

(0)
These bolts completely take the hassle out of header installation. They keep you from burning your hands getting the bolts installed. The gold-colored thread-lock patch prevents bolts from backing out or vibrating loose. 24 equally spaced serrations lock onto the header or exhaust manifold flange.
70,59 CHF
Più MR. GASKET Headlock Locking Header Bolts
THERMO TEC Heat Tape

Riferimento: THE-13997

Marca: Thermo Tec

THERMO TEC Heat Tape

(0)
Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires that you don`t want to remove. It can also be wrapped around odd-shaped components for lasting heat protection. Wrap it around a fuel line and say goodbye to vapor lock. It reflects radiant heat up to 2000 degrees Fahrenheit.
34,92 CHF
Più THERMO TEC Heat Tape
THERMO TEC Ignition Wire Heat Sleeving

Riferimento: THE-14045

Marca: Thermo Tec

THERMO TEC Ignition Wire Heat Sleeving

(0)
Thermo Tec ignition/plug wire heat sleeving offers custom-fit protection. These rolls of high-temperature sleeving feature e-glass/silica insulation good up to 1000 degrees Fahrenheit and a silicone outer surface good for temperatures up of to 500 degrees Fahrenheit. The sleeving is highly flexible, expandable, and abrasion-resistant for maximum...
122,48 CHF
Più THERMO TEC Ignition Wire Heat Sleeving
MR. GASKET Header Bolts 3/8-16x3/4'' Mini Hex-Head

Riferimento: MRG-3409

Marca: Mr. Gasket

MR. GASKET Header Bolts 3/8-16x3/4'' Mini Hex-Head

(0)
Designed for quick, easy installation of headers and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is ideal for tight spaces. These bolts are grade 5 with a 7/16`` hex head and a protective black finish.
36,11 CHF
Più MR. GASKET Header Bolts 3/8-16x3/4'' Mini Hex-Head
THERMO TEC Cool-It Plug Wire Sleeves Black

Riferimento: THE-14262

Marca: Thermo Tec

THERMO TEC Cool-It Plug Wire Sleeves Black

(0)
Thermo Tec Cool-It plug wire dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life, and will not react with petroleum products. Their double-wall construction keeps the wire and boot cooler in a high-temperature engine. Their universal size fits most boots, they`re easy to install, and most importantly, are non-flammable.
73,51 CHF
Più THERMO TEC Cool-It Plug Wire Sleeves Black
MR. GASKET Header Bolts 3/8-16x3/4'' with smaller Heads

Riferimento: MRG-919G

Marca: Mr. Gasket

MR. GASKET Header Bolts 3/8-16x3/4'' with smaller Heads

(0)
Designed for quick, easy installation of headers and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is ideal for tight spaces. These bolts are grade 5 with a 7/16`` hex head and a protective black finish.
35,13 CHF
Più MR. GASKET Header Bolts 3/8-16x3/4'' with smaller Heads
THERMO TEC Turbo Insulating Kit

Riferimento: THE-15001

Marca: Thermo Tec

THERMO TEC Turbo Insulating Kit

(0)
Thermo Tec turbo insulating kits were designed to protect, improve performance, and eliminate turbo lag on turbochargers. These complete kits will contain the heat produced by a turbo and fit a wide variety of turbines. These custom cut-to-fit kits come with an excessive amount of material to cover many turbos, from the smallest automotive to heavy-duty...
175,23 CHF
Più THERMO TEC Turbo Insulating Kit
THERMO TEC Thermo Sleeve Protector

Riferimento: THE-14006

Marca: Thermo Tec

THERMO TEC Thermo Sleeve Protector

(0)
Using Thermo Tec Thermo Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today`s high-performance applications.
91,67 CHF
Più THERMO TEC Thermo Sleeve Protector
THERMO TEC Muffler & Cat Heat Shield

Riferimento: THE-16500

Marca: Thermo Tec

THERMO TEC Muffler & Cat Heat Shield

(0)
Thermo Tec muffler/cat heat shields block the heat. Mufflers and catalytic converters can transfer unwanted heat to your vehicle`s interior. Install this highly reflective heat shield above your hot exhaust to reflect radiant heat away from your floorboard. The woven silica fabric is easily trimmed to size, and the flexible Mylar finish is easy cleaned....
125,61 CHF
Più THERMO TEC Muffler & Cat Heat Shield
THERMO TEC Cool-It Plug Wire Sleeves Natural

Riferimento: THE-14260

Marca: Thermo Tec

THERMO TEC Cool-It Plug Wire Sleeves Natural

(0)
Thermo Tec Cool-It plug wire dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life, and will not react with petroleum products. Their double-wall construction keeps the wire and boot cooler in a high-temperature engine. Their universal size fits most boots, they`re easy to install, and most importantly, are non-flammable.
73,51 CHF
Più THERMO TEC Cool-It Plug Wire Sleeves Natural
THERMO TEC Exhaust Wrap Natural

Riferimento: THE-11002

Marca: Thermo Tec

THERMO TEC Exhaust Wrap Natural

(0)
By wrapping your headers and exhaust pipe with Thermo Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust...
103,78 CHF
Più THERMO TEC Exhaust Wrap Natural
MR. GASKET Header Bolts 3/8-16x3/4'' Mopar 340-360

Riferimento: MRG-976

Marca: Mr. Gasket

MR. GASKET Header Bolts 3/8-16x3/4'' Mopar 340-360

(0)
Designed for quick, easy installation of headers and heat-treated for extra strength. The special washer faced, smaller-than-standard hex head is ideal for tight spaces. These bolts are grade 5 with a 7/16`` hex head and a protective black finish.
24,54 CHF
Più MR. GASKET Header Bolts 3/8-16x3/4'' Mopar 340-360
THERMO TEC Exhaust Wrap Carbon Fiber

Riferimento: THE-11042

Marca: Thermo Tec

THERMO TEC Exhaust Wrap Carbon Fiber

(0)
By wrapping your headers and exhaust pipe with Thermo Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust...
106,37 CHF
Più THERMO TEC Exhaust Wrap Carbon Fiber
Commenti (0)
Valutazione
Ancora nessuna recensione da parte degli utenti.

Seguici su Facebook