Edelbrock fuel pressure regulators are machined from aircraft-quality aluminum for those who demand the best. These regulators feature fluorosilicone diaphragm material for extended life and high-temperature protection. They are compatible with all grades of gasoline/methanol.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Pressure range: 5-12 PSI.
- Inlet attachment: 3/8`` NPT.
- Outlet size: 3/8`` NPT.
- Gauge port & mounting bracket included.
This high quality filter is a must when your old filter becomes dirty and doesn't look fresh. This filter is white paper and brings out the bling in that engine compartment. Dirty filters will hurt performance and cause your engine to run poorly.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
Change those fuel filters regularly. You should change your fuel filter every time you change the oil. Our 3 pack replacement fuel filters elements will keep you from running out just when you need it.
Control your manual choke with Edelbrock choke cables. They are 72 in. long and use a 3/8 in. mounting hole on the dash, and can be used on any manual choke carburetor.
Edelbrock AVS Performer Stepp-up spring kits contain just the assortment that you need to fine-tune your Edelbrock Performer & Thunder series AVS carburetors.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Victor series racing fuel pumps free-flow 130 gph, beating conventional racing pumps, which flow around 114 gph. These pumps are a necessity for drag racing, circle track, street machines or any application that demands high-output fuel delivery. They have high-volume inlet and outlet orifices and produce 10 psi. They are designed for use with...
Edelbrock divorced choke kits are available to give you the same reliability as your stock divorced choke, but with brand new parts! These kits include all of the parts and gaskets necessary to rebuild the carburetor and will work on small block Chevrolet engines with an Edelbrock performer intake manifold.
Edelbrock choke cable brackets are specifically designed to be used with Performer Series and/or Thunder Series AVS carburetors. Most of these assemblies are constructed of steel with a gold iridite finish to resist corrosion. Edelbrock is one of the industry legends for aftermarket automotive parts--you can't go wrong with their accessories to hold...
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
These Edelbrock throttle rod shoulder studs are designed to fit over the carburetor`s throttle lever. They will fit all Edelbrock Performer and Thunder AVS series carburetors. The Edelbrock throttle rod shoulder studs will also fit most applications using Chevrolet-style throttle linkage.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock 94 round chrome air cleaners are designed to properly clear and fit your Edelbrock 94 Series carburetor for a complete hot rod look. They feature a high-quality paper element and a brilliant triple chrome top that is reminiscent of the early hot rod era. Each air cleaner includes a top, base, filter, band clamp, and wing nut. Edelbrock 94 air...
Edelbrock fuel pressure regulators are machined from aircraft-quality aluminum for those who demand the best. These regulators feature fluorosilicone diaphragm material for extended life and high-temperature protection. They are compatible with all grades of gasoline/methanol.
