These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Stud diameter: ¼``.
- Fits TH350 & 700R4.
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
This fuel pressure regulator is a return style fuel pressure regulator. The operating ufel pressure range is 4.5 9 PSI. The inlet & outlet size is 3/8`` NPT. The fuel return line size should be 3/8`` I.D. or larger or the regulator will not regulate properly.
Dress up your engine the easy way with Edelbrock`s chrome air cleaner tops. Designed as direct replacements on GM V8 cars and trucks with TBI fuel injection, these tops are stamped from quality 18-gauge steel, and triple chrome plated for a high-quality finish for great style. A sealing ring is also included.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 1-3/8-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to...
Tuning your own carburetor can mean replacing gaskets several times during testing. Edelbrock offers a good selection of metering block gaskets so that you`ll always have what you need. These black fiber gaskets are high-quality replacements for your carburetor.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Chrome plated steel. Includes heavy and light spring sets. Fits Holley carburetors.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Mr. Gasket air cleaner spacers will properly locate your air cleaner, solving any interference problems you might have.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock Pro-Flo Series air cleaners are the perfect solution to your low hood clearance problems. These high-quality air cleaners are available in several styles and sizes to suit your tastes and fit your ride.
This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is ¼`` diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Kit includes all hardware needed for installation along with universal throttle bracket.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
These Edelbrock throttle rod shoulder studs are designed to fit over the carburetor`s throttle lever. They will fit all Edelbrock Performer and Thunder AVS series carburetors. The Edelbrock throttle rod shoulder studs will also fit most applications using Chevrolet-style throttle linkage.
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
These Edelbrock throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables and transmission kickdown cables.
