Accueil
THERMO TEC Aluminum Heat Shield Sleeve
  • THERMO TEC Aluminum Heat Shield Sleeve

THERMO TEC Aluminum Heat Shield Sleeve

THE-17063
Thermo Tec

Thermo Tec Thermo-Flex aluminum heat shield sleeves are made from a composite heat shield material with unlimited uses. This composite material provides for abrasion resistance, thermal insulation, and the physical containment of hoses and wiring. The material is a combination of aluminum, silica, and stainless steel, which creates sleeves that are flexible, lightweight, and strong. Install these sleeves on wires or hoses by slitting the material, rather than disconnecting the wire or hose ends.

30,81 CHF
TTC
Quantité

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Description

- Length: 36``.

- Diameter: 0.625``.

- Color: Black.

Détails du produit
THE-17063
GPSR

Marque: Thermo Tec

Déjà vus
EDELBROCK Metering Jets .089''

Référence: EDL-1424

Marque: Edelbrock

EDELBROCK Metering Jets .089''

(0)
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
11,35 CHF
Détails EDELBROCK Metering Jets .089''
EDELBROCK Throttle Cable Plate Kit Ford 351W

Référence: EDL-1491

Marque: Edelbrock

EDELBROCK Throttle Cable Plate Kit Ford 351W

(0)
Edelbrock throttle cable brackets are designed to be used with EDL-1483 or EDL-1844 throttle level adapters to reposition your factory throttle cable to align with Edelbrock Performer or Thunder Series carburetors. Designed for Ford products with cable operated throttle and automatic kick down rod. The throttle cable plate kit only works when the throttle...
24,43 CHF
Détails EDELBROCK Throttle Cable Plate Kit Ford 351W
MR. GASKET Fuel Fitting 3/8'' NPT

Référence: MRG-2969G

Marque: Mr. Gasket

MR. GASKET Fuel Fitting 3/8'' NPT

(0)
Chrome-plated fuel line fitting. Engineered for competition use, allows maximum fuel flow with minimal restriction. The chrome-plated finish adds a special touch for custom or competition fuel line applications.
26,38 CHF
Détails MR. GASKET Fuel Fitting 3/8'' NPT
16 autres produits dans la même catégorie :
THERMO TEC Turbo Insulating Kit

Référence: THE-15003

Marque: Thermo Tec

THERMO TEC Turbo Insulating Kit

(0)
Thermo Tec turbo insulating kits were designed to protect, improve performance, and eliminate turbo lag on turbochargers. These complete kits will contain the heat produced by a turbo and fit a wide variety of turbines. These custom cut-to-fit kits come with an excessive amount of material to cover many turbos, from the smallest automotive to heavy-duty...
60,10 CHF
Détails THERMO TEC Turbo Insulating Kit
THERMO TEC Heat Sleeve

Référence: THE-18050

Marque: Thermo Tec

THERMO TEC Heat Sleeve

(0)
Thermo Tec silicone-coated fiberglass fire sleeves are designed to protect wires, cables and hoses from high-temperature exposure, liquid spills, and occasional exposure to flames. The high-quality sleeving is made from braided fiberglass and coated with a compound silicone rubber. These heat sleeves are capable of continuous protection to 500 degrees...
56,21 CHF
Détails THERMO TEC Heat Sleeve
THERMO TEC Spark Plug Wire Heat Shield Sleeves

Référence: THE-14250

Marque: Thermo Tec

THERMO TEC Spark Plug Wire Heat Shield Sleeves

(0)
Thermo Tec spark plug wire heat shield sleeves feature aluminized outer surfaces that reflect 90 percent of radiant heat, with formulated inside silica based fabrics that prevent conductive heat from penetrating. The ultimate protection for spark plug wires and boots. These sleeves block conductive heat and reflect 90 percent of radiant heat up to 2000...
77,83 CHF
Détails THERMO TEC Spark Plug Wire Heat Shield Sleeves
THERMO TEC Thermo Sleeve Protector

Référence: THE-14015

Marque: Thermo Tec

THERMO TEC Thermo Sleeve Protector

(0)
Using Thermo Tec Thermo Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today`s high-performance applications.
49,73 CHF
Détails THERMO TEC Thermo Sleeve Protector
THERMO TEC Spark Plug Wire Heat Shield Sleeves

Référence: THE-14200

Marque: Thermo Tec

THERMO TEC Spark Plug Wire Heat Shield Sleeves

(0)
Thermo Tec spark plug wire heat shield sleeves feature aluminized outer surfaces that reflect 90 percent of radiant heat, with formulated inside silica based fabrics that prevent conductive heat from penetrating. The ultimate protection for spark plug wires and boots. These sleeves block conductive heat and reflect 90 percent of radiant heat up to 2000...
32,97 CHF
Détails THERMO TEC Spark Plug Wire Heat Shield Sleeves
THERMO TEC Heat Tape

Référence: THE-14002

Marque: Thermo Tec

THERMO TEC Heat Tape

(0)
Thermo-Shield aluminized adhesive-backed tape is great for wrapping the hoses and wires that you don`t want to remove. It can also be wrapped around odd-shaped components for lasting heat protection. Wrap it around a fuel line and say goodbye to vapor lock. It reflects radiant heat up to 2000 degrees Fahrenheit.
38,92 CHF
Détails THERMO TEC Heat Tape
THERMO TEC Exhaust Wrap Carbon Fiber

Référence: THE-11041

Marque: Thermo Tec

THERMO TEC Exhaust Wrap Carbon Fiber

(0)
By wrapping your headers and exhaust pipe with Thermo Tec exhaust wrap, you keep exhaust heat in your pipes where it belongs. This reduces underhood temperatures up to 70 percent and cools the incoming air/fuel mixture to increase horsepower and fuel efficiency. Not only that, but the reduced heat also extends the life of electronic components. Exhaust...
65,83 CHF
Détails THERMO TEC Exhaust Wrap Carbon Fiber
THERMO TEC Thermo Sleeve Protector

Référence: THE-14011

Marque: Thermo Tec

THERMO TEC Thermo Sleeve Protector

(0)
Using Thermo Tec Thermo Sleeve will provide your wires and hoses with protection from radiant heat. The aluminized sleeving reflects over 90 percent of heat, while the inner material is fireproof and resistant to oil. Combined, the high-temperature fabric and reflective foil skin provide the protection you need in today`s high-performance applications.
155,66 CHF
Détails THERMO TEC Thermo Sleeve Protector
THERMO TEC Ignition Wire Heat Sleeving

Référence: THE-14040

Marque: Thermo Tec

THERMO TEC Ignition Wire Heat Sleeving

(0)
Thermo Tec ignition/plug wire heat sleeving offers custom-fit protection. These rolls of high-temperature sleeving feature e-glass/silica insulation good up to 1000 degrees Fahrenheit and a silicone outer surface good for temperatures up of to 500 degrees Fahrenheit. The sleeving is highly flexible, expandable, and abrasion-resistant for maximum...
153,50 CHF
Détails THERMO TEC Ignition Wire Heat Sleeving
THERMO TEC Express Sleeves

Référence: THE-14035

Marque: Thermo Tec

THERMO TEC Express Sleeves

(0)
Thermo-Tec`s new Express Sleeves use a combination of high-temperature insulation material and a highly reflective Mylar foil with a Velcro closure. The sleeves are designed to provide maximum protection for wires, hoses, and cables from the very damaging effect of radiant heat with an easy application. Simply pull apart the material, wrap it around the...
63,78 CHF
Détails THERMO TEC Express Sleeves
MR. GASKET Headlock Locking Header Bolts

Référence: MRG-2231G

Marque: Mr. Gasket

MR. GASKET Headlock Locking Header Bolts

(0)
These bolts completely take the hassle out of header installation. They keep you from burning your hands getting the bolts installed. The gold-colored thread-lock patch prevents bolts from backing out or vibrating loose. 24 equally spaced serrations lock onto the header or exhaust manifold flange.
70,59 CHF
Détails MR. GASKET Headlock Locking Header Bolts
THERMO TEC Cool-It Plug Wire Sleeves Black

Référence: THE-14262

Marque: Thermo Tec

THERMO TEC Cool-It Plug Wire Sleeves Black

(0)
Thermo Tec Cool-It plug wire dual-purpose sleeves enhance performance, reduce misfires, extend plug wire life, and will not react with petroleum products. Their double-wall construction keeps the wire and boot cooler in a high-temperature engine. Their universal size fits most boots, they`re easy to install, and most importantly, are non-flammable.
73,51 CHF
Détails THERMO TEC Cool-It Plug Wire Sleeves Black
THERMO TEC Cool Tube Heat Shield

Référence: THE-14500

Marque: Thermo Tec

THERMO TEC Cool Tube Heat Shield

(0)
Keep your induction air cool with Thermo Tec Cool Tube heat shields. The unique lace-up tube cover design allows these heat shields to fit from 2.50 in. to 4 in. air tubes. The lace on heat shield blocks over 98 percent of the radiant heat of the turbo and exhaust. Each kit comes complete with four different color laces, blue, yellow, red and white.
96,21 CHF
Détails THERMO TEC Cool Tube Heat Shield
Commentaires (0)
Note
Aucun avis n'a été publié pour le moment.

Suivez-nous sur Facebook

Facebook