The Performer carburetor maintenance kits consist of genuine Edelbrock parts that will help you to keep your carburetor in top notch condition. These kits include all of the parts and gaskets necessary to rebuild or modify your Edelbrock Performer carb.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Mr. Gasket Air Cleaner Spacer and Adapter Kit eliminates air cleaner fit problems and includes spacers and adapters of different heights that fit between the carburetor neck flange and the air filter assembly to allow the amount of clearance you need for your application.
You want the best bolts for your buck? Then use Mr. Gasket`s zinc plated grade 5 steel hex head intake manifold bolts 3/8``-16 x 1``. Includes flat washers to provide a uniform clamp load and to help prevent galling on aluminum manifolds.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Mr. Gasket air cleaner nuts are made from billet aluminum with knurled sides for easy hand tightening.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock electric chokes kits are designed to give you reliable starting in all weather conditions. The kits include all necessary parts to convert your carburetor into an electric choke operation.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Get quality fuel performance from your EFI system! These quality replacement high-flow fuel pumps from Edelbrock are just what you need to get your Pro-Flo EFI system back on track. They`re identical to the pumps supplied with the systems and are great for replacing malfunctioning or defective piece.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
This high performance electric fuel pump has a free flow rate of 105 GPH with a maximum pressure of 14 psi.
This is a high quality carburetor stud that looks good and works well in all applications. This stud has a bullet tip which allows for easy carburetor installation and eliminates that problem of carb getting hung on the threads and not going down straight to the intake.
Edelbrock Performer RPM Dual Quad Air-Gap manifold and carburetor kits provide everything needed to convert from a single carburetor intake to a powerful dual-quad carburetor intake system for small block Chevys. These kits include the new RPM Dual Quad Air-Gap intake, two 500 cfm Thunder Series AVS carburetors (one manual choke, one electric choke),...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
This lightweight pump includes mounting bracket and hardware and is universal for all carbureted gasoline engines. 7 PSI max. 95 GPH.
Install your throttle cables the right way with these throttle return kits from Edelbrock. Each kit includes the springs and bracket you need to ensure good looks and proper throttle actuation.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
The Performer carburetor maintenance kits consist of genuine Edelbrock parts that will help you to keep your carburetor in top notch condition. These kits include all of the parts and gaskets necessary to rebuild or modify your Edelbrock Performer carb.
