Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Tune any Q-Jet with Edelbrock secondary metering rods. These secondary metering rods will work on any year Quadrajet. The dimension indicates the tip diameter, not the shaft diameter.
These Grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
These Edelbrock air horn gaskets will allow you to take off the top of your Edelbrock carburetor when changing jets or metering rods. They include five air horn gaskets so you can make multiple changes and use just one gasket kit.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
This Mr. Gasket throttle cable bracket is made from chrome plated steel.
Edelbrock Performer RPM street fuel pumps are designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications. These high performance street fuel pumps feature a high-quality, 3-stage polished finish. The unique valve design of these pumps improves flow quantity and quality and will support engines with up to 600 hp. The...
Edelbrock carburetor stud kits supply all of the correct studs, nuts and washers to mount your Edelbrock carburetor correctly. These carb stud kits are must-have accessories when installing or tuning your carburetor.
These Grade 5 hex head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
Edelbrock fuel pressure regulators are machined from aircraft-quality aluminum for those who demand the best. These regulators feature fluorosilicone diaphragm material for extended life and high-temperature protection. They are compatible with all grades of gasoline/methanol.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Get quality fuel performance from your EFI system! These quality replacement high-flow fuel pumps from Edelbrock are just what you need to get your Pro-Flo EFI system back on track. They`re identical to the pumps supplied with the systems and are great for replacing malfunctioning or defective piece.
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2.5-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
