EDELBROCK Throttle Solenoid & Bracket
  • EDELBROCK Throttle Solenoid & Bracket

EDELBROCK Throttle Solenoid & Bracket

EDL-8059
Edelbrock
Edelbrock throttle solenoid and bracket kits are designed for square bore carburetors and raise your engine idle speed when the air conditioning is on. These kits include a 12 V solenoid and mounting bracket. The Edelbrock throttle solenoid bracket kits match perfectly with all Edelbrock Performance series and Carter AFB series carburetors.
302,03 CHF
TTC
Quantité

 

Security policy (edit with Customer reassurance module)

 

Delivery policy (edit with Customer reassurance module)

 

Return policy (edit with Customer reassurance module)

Détails du produit
EDL-8059
GPSR

Marque: Edelbrock

16 autres produits dans la même catégorie :
EDELBROCK EGR Plate 4V

Référence: EDL-8053

Marque: Edelbrock

EDELBROCK EGR Plate 4V

(0)
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
148,10 CHF
Détails EDELBROCK EGR Plate 4V
MR. GASKET Bell Crank Kit Throttle Linkage

Référence: MRG-1523

Marque: Mr. Gasket

MR. GASKET Bell Crank Kit Throttle Linkage

(0)
This bell crank kit features 12 mounting holes for multi-arm positioning and can be used in either push or pull type throttle linkages. Center hole is ¼`` diameter for easy mounting. Each arm has 3 holes for various throttle ratios. Kit includes all hardware needed for installation along with universal throttle bracket.
123,67 CHF
Détails MR. GASKET Bell Crank Kit Throttle Linkage
MR. GASKET Carburetor Spacer Kit 1''

Référence: MRG-4945

Marque: Mr. Gasket

MR. GASKET Carburetor Spacer Kit 1''

(0)
Increase your power and performance with this 1`` carburetor spacer from Mr.Gasket. Designed to fit the standard Holley & Carter bolt pattern. This precision die cast aluminum spacer kit includes the studs, washers, nuts, gaskets and 3/8`` PCV tube.
112,42 CHF
Détails MR. GASKET Carburetor Spacer Kit 1''
EDELBROCK Air Filter Element 10x2''

Référence: EDL-1218

Marque: Edelbrock

EDELBROCK Air Filter Element 10x2''

(0)
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
45,40 CHF
Détails EDELBROCK Air Filter Element 10x2''
EDELBROCK Air Filter Element Triangular

Référence: EDL-4226

Marque: Edelbrock

EDELBROCK Air Filter Element Triangular

(0)
Designed to work with Edelbrock`s triangle and oval air cleaners, these reusable air filter elements are direct replacements. They`re made by K&N to fit Edelbrock`s air cleaners so you can be sure they are top quality. The filter`s cotton gauze filter material comes pre-oiled for excellent filtration and can be easily washed and reoiled for a lifetime...
83,02 CHF
Détails EDELBROCK Air Filter Element Triangular
EDELBROCK Carburetor Calibration Kit

Référence: EDL-1841

Marque: Edelbrock

EDELBROCK Carburetor Calibration Kit

(0)
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
132,75 CHF
Détails EDELBROCK Carburetor Calibration Kit
MR. GASKET Carburetor Studs 2''

Référence: MRG-61

Marque: Mr. Gasket

MR. GASKET Carburetor Studs 2''

(0)
Mr. Gasket medium length carburetor studs put an end to stripped-out threads in cast aluminum manifolds, holding the gasket in place and perfectly aligning the carburetor in position. Zinc-plated and 2-inch long, they have 5/16-18 threads on one end and 5/16-24 on the other, come in a package of four, and have four matching nuts and washers to complete...
25,73 CHF
Détails MR. GASKET Carburetor Studs 2''
EDELBROCK Automatic Trans Rod Extension Kit 1/4'' Chrysler

Référence: EDL-8003

Marque: Edelbrock

EDELBROCK Automatic Trans Rod Extension Kit 1/4'' Chrysler

(0)
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
14,38 CHF
Détails EDELBROCK Automatic Trans Rod Extension Kit 1/4'' Chrysler
Commentaires (0)
Note
Aucun avis n'a été publié pour le moment.

Suivez-nous sur Facebook