Mr. Gasket Air Cleaner Spacer and Adapter Kit eliminates air cleaner fit problems and includes spacers and adapters of different heights that fit between the carburetor neck flange and the air filter assembly to allow the amount of clearance you need for your application.
Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
- Kit includes 2 adapters for 5-1/8 in carb necks, 1 adapter for 3 in carb necks and 1 adapter for 2-5/8 in carb necks.
- 1/2 in and 1 in spacers can be combined.
Mr. Gasket Flat Black Easy-Flow Air Cleaners customize your engine compartment for that stealth look. Designed to fit all single 2-, 3-, and 4-barrel carburetors with 5.125-inch carburetor necks, these competition air cleaners are ideal for either race or high-performance street use.
Top off your air cleaner with Mr. Gasket's large chrome spin nut. Chrome plated for good looks and fits 1/4-20`` and 5/16-18`` threaded studs.
Cable assembly is composed of a sturdy solid steel inner wire with a plated steel outer spring shroud. Cable is 72`` long and can be shortened with simple hand tools. Easily installed, it requires a 3/8`` diameter mounting hole.
Do you have hood to air cleaner clearance problems? Mr. Gasket air cleaner will solve that problem. 14 in dia x 2-1/4 in tall. This chrome plated steel air cleaner fits all 5-1/8 in carb neck. This cleaner is designed to fit cars with minimal hood clearance. Filter element is flame retardant high CFM rating. Included are all PVC fittings and necessary...
Edelbrock Performer EPS intake manifold and carburetor kits contain all of the necessary pieces to upgrade your induction system. They include an Edelbrock Performer EPS aluminum intake manifold with either a natural aluminum finish or an EnduraShine finish, an intake gasket set, intake manifold bolts, a carburetor stud kit, and a Performer Series 600 CFM...
These Edelbrock carburetor spacers allow you to space your carburetor above the intake flange to increase plenum area for more torque and horsepower. Available in aluminum and heat-insulating phenolic or wood fiber, these Edelbrock carb spacers are just what you need to insulate or tune your carburetor/manifold powerband.
These Grade 8 bolts have a 12 pt smaller-than-standard head & flange, ideal where space is tight. Extra thick washers supply optimum clamping. Bright zinc plated.
Edelbrock`s Performer carburetors feature two-piece, all-aluminum construction for cooler operating temperatures and less warping. There are no gaskets below the fuel bowl level for fewer leaks, and no plastic parts or power valves to blow out. The carbs use easily changed metering rods for precise tuning, non-adjustable secondary air valves and the...
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
Edelbrock air cleaner spacers are designed to fit between your carburetor neck flange and the air filter assembly. They come in different heights to allow for the right amount of clearance you need for your application.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
This high performance electric fuel pump has a free flow rate of 105 GPH with a maximum pressure of 14 psi.
These Edelbrock choke cap kits are designed to rebuild your electric choke cap. They include a choke cap, a gasket for the cap, three screws and three locking tabs.
Get quality fuel performance from your EFI system! These quality replacement high-flow fuel pumps from Edelbrock are just what you need to get your Pro-Flo EFI system back on track. They`re identical to the pumps supplied with the systems and are great for replacing malfunctioning or defective piece.
Add both style and performance to your ride with Edelbrock Pro-Flo high-flow air cleaners. They feature a color-matched breathable lid and 3 in. tall element. Pro-Flow air cleaners fit all popular 5 1/8 in. diameter carburetors and include a black anodized Edelbrock script ``E`` nut. Each filter assembly features Edelbrock`s washable Pro-Flo air filter...
Carburetor adapters from Edelbrock allow you to use almost any carburetor on almost any intake. They will save you the hassle and expense of purchasing all-new components when changing carburetors or intakes.
Mr. Gasket Air Cleaner Spacer and Adapter Kit eliminates air cleaner fit problems and includes spacers and adapters of different heights that fit between the carburetor neck flange and the air filter assembly to allow the amount of clearance you need for your application.
