Edelbrock universal fuel hose and filter kits allow you to add a fuel filter where none existed. Utilizing part of your stock steel fuel line, they offer a quick fix, simply cut the stock line, install the compression fitting, add the neoprene hose, clamp and fuel filter and connect to your carburetor. Kits include fuel filter, fuel hose, special fittings to adapt 3/8 in. steel line to hose, and stainless steel worm-type hose clamps.
Ihre Daten sind bei uns sicher und werden nicht an Dritte weitergegeben¨
Lieferungen gemäss den allgemeinen Geschäftsbedingungen
Umtausch gemäss den allgemeinen Geschäftsbedingung
- Inlet size: 3/8`` hose barb.
- Outlet size: 3/8`` hose barb.
- Material: Natural steel.
This stainless steel braided throttle cable kit is adjustable and cuts to length. 36`` cable with 24`` in sleeve. ¼``-20 thread on connection.
Use to block off open engine vacuum fittings. Sixteen pcs. Of "Buna-N" rubber offer more durability, longer life than neoprene/vinyl, especially when exposed to high temps.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock Thunder Series AVS carburetor calibration kits are designed to tune your car to match any engine or track condition. These kits include an assortment of metering rods and jets, a pair of metering rod retaining springs, and a complete assortment of step-up springs.
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
Edelbrock Pro-Flo Round Air Filter Elements are washable and reusable and feature a unique Pro-Charge strip that will let you know when it`s time to clean your filter. Each filter comes pre-oiled for easy installation and is available in multiple colors to match your ride.
Edelbrock fuel pressure regulators are machined from aircraft-quality aluminum for those who demand the best. These regulators feature fluorosilicone diaphragm material for extended life and high-temperature protection. They are compatible with all grades of gasoline/methanol.
Rebuilding your nostalgic 94 carburetor? Edelbrock 94 rebuild kits contain everything you need to do the job right. Kits include fuel inlet seat and needle, accelerator pump assembly and spring, accelerator check ball, check ball retainer, power valve assembly, float gauge and all the necessary gaskets. These rebuild kits will overhaul any Edelbrock 94 or...
These Mr. Gasket air cleaners will dress-up your engine compartment for that show car look. When it comes to good looks and durability, Mr. Gasket has you covered.
Edelbrock has paved the way to a trouble-free manifold installation job for you with this comprehensive array of accessories. These accessories include anodized air cleaner hold nuts, manifold pipe plugs, and everything in between.
Edelbrock throttle cable brackets are just what you need to hook up your cables the right way.
Special heat-absorbing material with layers of aluminum alloy forces heat away from the carburetor. Allows a cooler, denser fuel mixture to prevent engine heat from vapor-locking gasoline in the carburetor.
Edelbrock knows carbs. That`s why they offer these calibration kits for Performers series carburetors. They include all the parts you need to help you get the best performance from Edelbrock carburetors.
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
Edelbrock universal fuel hose and filter kits allow you to add a fuel filter where none existed. Utilizing part of your stock steel fuel line, they offer a quick fix, simply cut the stock line, install the compression fitting, add the neoprene hose, clamp and fuel filter and connect to your carburetor. Kits include fuel filter, fuel hose, special fittings to adapt 3/8 in. steel line to hose, and stainless steel worm-type hose clamps.
