Security policy (edit with Customer reassurance module)
Delivery policy (edit with Customer reassurance module)
Return policy (edit with Customer reassurance module)
Adapts your PCV system to Mr. Gasket air cleaner kits. 90 degree angle style.
This carburetor bushing kit reduces the ½`` throttle shaft hole to ¼`` I.D., which makes for easy throttle linkage attachment, or can be used to replace the stock rubber unit. Machined from cold roll steel, then bright zinc plated, the two piece bushing measures 9/16`` wide when installed and fits most 4-bbl. carburetors with ½`` throttle linkage hole....
Edelbrock offers these divorced choke rods specifically for use with Q-Jet carbs and Edelbrock manifolds. They are quality pieces for direct replacement of the choke rods on your Q-Jet.
If you want to keep your engine running clean, you should replace the element in your Edelbrock air cleaner every 3`000 miles. Use Edelbrock`s quality replacement elements to deliver clean air to your engine for superior flow and performance.
Edelbrock throttle solenoid and bracket kits are designed for square bore carburetors and raise your engine idle speed when the air conditioning is on. These kits include a 12 V solenoid and mounting bracket. The Edelbrock throttle solenoid bracket kits match perfectly with all Edelbrock Performance series and Carter AFB series carburetors.
Get smooth trouble-free throttle operation with a new bushing. Fits 1/4" diameter rod.
Choose from a variety of throttle linkage kits from Edelbrock for your dual or tripple carburetor equipped car. From smooth, progressive throttle activation to adjustable forward mount styles that let you dial in the amount of throttle you want, we have a linkage kit that`s right for you.
Are you using an Edelbrock Performer or Thunder series AVS carburetor? Then you need these Edelbrock metering jets! The jet and rod is changed to get the cruise air/ fuel ratio leaned out. The step in the rod changes the effective jet area between high and low manifold vacuum conditions. The brass metering jets are designed for use with Edelbrock...
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
The Mr.Gasket carburetor heat shield will help eliminate fuel boiling and vapor lock caused by heat conducted from the manifold to the carburetor.
Edelbrock fuel pressure regulators are machined from aircraft-quality aluminum for those who demand the best. These regulators feature fluorosilicone diaphragm material for extended life and high-temperature protection. They are compatible with all grades of gasoline/methanol.
Edelbrock Pro-Flo universal conical air filter elements are an economical way to ensure that your engine is getting clean air - without the expense of buying a new filter every few thousand miles. They`re constructed for superior filtration and airflow performance. The filter elements feature triple chrome plated trim for a show-quality look and are...
Thanks to the folks at Edelbrock, installing your new intake and carburetor has been made easier. With their EGR adapters, your existing EGR valve is repositioned to allow clearance for your carburetor. They`re made of cast aluminum and come complete with gaskets and bolts.
These are high quality gaskets that are a good choice for replacement to seal those annoying leaks or when doing jet changes at the track.
This block-off plate is cut to cover stock fuel pump openings. Gasket included. Chevrolet 265 thru 400 cui.
Edelbrock metering rods are specifically designed for use with Edelbrock Performer series carburetors. Do not attempt to use them with other brands. A variety of sizes is available.
